Car washing foam water gun (pressurized foam water gun) is a high-end practical cleaning foam water gun designed for families. It has the characteristics of water saving, pressurized and environmental protection. It can be widely used to clean vehicles (cars and motorcycles), water flowers, irrigate, flush the ground, wash walls, shower, play, etc. It is a good friend to beautify the environment at home.
The high-pressure foam water gun device enables the high-pressure plunger pump to produce high-pressure water to wash the surface of the object. The impact of the water is greater than the adhesion between the dirt and the surface of the object, and the high-pressure water will peel off and wash away the dirt to clean the surface of the object. [1] Because the high-pressure water column is used to clean the dirt, unless it is a very stubborn oil stain, a little detergent needs to be added. Otherwise, the foam generated by the strong water pressure is enough to take away the general dirt.
Car washing foam water gun features water saving, pressurization, environmental protection, etc. it can clean vehicles (cars, motorcycles), water flowers and other accessories High quality metal coated foam water gun
Accessories include car wash foam gun
1. high quality metal coated foam water gun (aluminum alloy foam water gun is the best, followed by zinc alloy, followed by copper)
2. High grade water pipe (good water pipe is tasteless, frost resistant, sun resistant and high pressure resistant)
3. Quick plastic (or all copper) water connection / water stop joint
4.1/2 3 / 4 (4 points and 6 points) plastic (or all copper) standard joint
5.12-24mm faucet universal joint
usage method
1. Connect the faucet as shown in the figure and open the water valve
2. adjust the rotation angle of the foam water gun to adjust the water flow to umbrella, scattering and direct
3. press the handle of the foam water gun, empty the air in the water pipe first, and then flush it after the water comes out
4. Moisten the car first, then brush the car, and then flush the car
5. After wetting the cotton brush, apply the car wash fluid and bubble the car body from top to bottom to remove the dirt
6. Wipe the water on the car body with a cotton towel or PVA synthetic weight
7. after use, please drain the foam water gun and water pipe
Car knowledge
1. It is not suitable to brush the car immediately after parking. It is best to clean it after 10-15 minutes, otherwise the paint surface will suddenly be cold and cause cracking
2. After washing the car, do not wipe the car with a dry towel. It is best to use a wet towel or cotton cloth that has been wrung dry
3. Car washing should not be too frequent, generally 3-4 times a month
4. Washing powder and soapy water cannot be used to wash the car. Because of its high pH value, it is easy to damage the paint. It is recommended to use washing powder.
matters needing attention
1. it is forbidden to aim the foam water gun at children and animals to avoid injury.
2. when using in winter, in order to prevent icing in the foam water gun, the water in the water pipe should be drained in time.
