Ministry of Industry and Information Technology: From July 1st, the production of models that do not meet the speed limit signal signs will be suspended

Tram Resources was informed that on June 9, the Ministry of Industry and Information Technology issued the "Notice on the Rectification of GB24545-2019".

from July 1, 2022, applicable models that have obtained type approval shall meet the requirements of Standard 5.8, and those that do not meet the requirements of the Standard Models will be discontinued

The notice clarifies that in accordance with the requirements of GB 24545-2019 "Technical Requirements and Test Methods for Vehicle Speed ​​Limiting Systems",.

It is reported that GB 24545-2019 is a national mandatory standard and was released on October 14, 2019. The specific implementation time is as follows:

1) Except for Article 5.8, other technical content is only proposed for the newly-approved models, and it will be implemented from July 1, 2020, and there is no requirement for the models that have already been type-approved.

2) For clause 5.8, different transition periods are given for different models.For models that newly apply for type approval, it will be implemented from July 1, 2021; for models that have passed type approval, it will be implemented from July 1, 2022.

standard 5.8

Tram resource query GB 24545-2019 learned that the specific content of theis as follows:

When the vehicle speed exceeds the set speed, an alarm signal should be sent to the driver in the form of visual and audible signals.The audible signal should be clear and easy for the driver to recognize.The visual signaling device shall meet the following requirements:

a) It should be ensured that the driver can be identified at the corresponding position.The corresponding position is the position where the driver is in the driving position and can move freely under the protection of the restraint system after adjustment according to the manufacturer's instructions for use.

b) The speed limit signal sign is shown in Figure 2, which shall comply with the relevant provisions of GB 4094.

c) shall be yellow or amber.

d) The visual signal device has a self-checking action that can be visually recognized after the vehicle is powered on.The visual signal device should be bright and eye-catching when it is lit, so that the driver can clearly observe it no matter when driving during the day or night after adapting to the ambient road lighting conditions.

The original text is as follows:

Equipment Industry Development Center of the Ministry of Industry and Information Technology

Equipment Center [2022] No. 340

Notice on the rectification of GB24545-2019

All vehicle manufacturers:

According to the requirements of GB 24545-2019 "Technical Requirements and Test Methods for Vehicle Speed ​​Limiting Systems", from July 1, 2022, applicable models that have obtained type approval shall meet the requirements of Standard 5.8.

Relevant enterprises are requested to verify the product situation as soon as possible, and carry out rectification through change and expansion. From July 1, 2022, the production of models that do not meet the standard requirements will be stopped.

Equipment Industry Development Center of the Ministry of Industry and Information Technology